Smooth, Passive Stopping for Every Ride
We've updated our Bungee Brake Kit to include the Stainless Steel brake block instead of the old Nylon block. We will continue to stock replacement Nylon blocks for our customers who have previously purchased a Bungee Brake Kit.
What Makes This Braking System Different?
The Bungee Brake brings each ride to a smooth and gentle stop. A stainless steel block rides freely on the cable until a trolley bumps into it near the last stretch of the line; the bungee cord takes over from there, stretching to bring the rider to a stop before easing them back down to the low point. It's the braking method we build many of our kits around, now available as a stainless upgrade that won't wear out and need replacing like the plastic version does.
What's Included in the Box?
Stainless steel block, compatible with cable up to 1/2" in diameter, built to outlast a plastic block for years
1/2" heavy-duty bungee cord for smooth, consistent stopping
Rubber impact bumper to cushion contact with the block
Mounting hardware, bolts, eye-bolt, eye-lag screw, and quick-links, for a complete setup
Cable back-up sling for the bungee anchor eye-lag screw
Why Choose the Bungee Brake Kit?
Three builds to match your run:
20 FT for lines up to 200 feet
30 FT for 200-500 feet, or
Double 30 FT when a longer, faster line needs extra stopping force
Stainless steel construction built for repeat, commercial-level use
Rated for zip lines with a maximum slope of 6 percent (a 6-foot drop per 100 feet of distance)
Designed & Assembled in Oregon, USA
Is This the Right Braking System for You?
If you want every rider to stop the same smooth way, every time, without having to do anything themselves, this is the brake we'd put on our own zip line.
Not only do you get the brake kit, you also get the very best customer service in all the land for all your questions and concerns. Call us at (888) 476 3701.
If you're not happy, send it back for a full refund within one year.
FREE Design consultation
Want to talk with a specialist about your project?
Schedule a free 25 minute consult to help you plan your zip line project.
Zip Line University
Explore Our Knowledge Base
Installing a planning a zipline can seem like a daunting project. We're here to demystify the process!
Learn more about zipline installation
FAQ
How do I measure elevation change in my backyard?
Please refer to the manual that comes with your kit for specific installation instructions.
Stand at the end tree and hold a 4 FT Carpenter’s Level like a rifle. Holding one end up to your eye, point the opposite end at the base of the starting tree, right where the dirt and tree meet. Make sure the bubble is between the two hashes indicating level (crouch down if your yard has a minimal slope or climb a ladder if your yard has lots of slope).
Once you have the level aiming at the base of the starting tree, measure from the Carpenter’s Level down to the ground. This measurement is your natural elevation change.
If you have questions, please do not hesitate to give us a call at 888-476-3701
How do I figure out the slope for my zip line?
Please refer to the manual that comes with your kit for specific installation instructions.
The slope determines the speed of the zip line. Essentially this is the angle you set the cable at between the two trees. The slope is calculated by multiplying the distance between your trees times .03 or 3%.
More details on Slope can be found in the Zip Line Gear handbook included with your purchase. You can also view a digital version of the “Cable Slope & Sag” right here. We recommend finding a landscape with a natural slope of 3% to 6%, This is a 3’ - 6’ foot drop per 100’ feet.
For zip lines that will NOT utilize a Bungee Brake System, (a Stop Block is NOT a braking system) the maximum allowable slope is 3%. For zip line setups that include a Bungee Brake, the maximum allowable slope is 6%.
!!WARNING!! Zip line must never exceed 6% (6’ foot drop per 100’ feet) riding slope. High speed collision with end point may cause injury or death.
I don't have trees. Can I use posts?
Yes you can, but you need to carefully read the instructions for how to select, and install posts in the Backyard Zip Lines handbook included with your purchase. Alternatively, you can review the information in the digital version of our handbook right here.
If you are in any doubt as to how to properly select and install a wood post, please do not hesitate to contact us at 888-476-3701.
Recommended for You
- Choosing a selection results in a full page refresh.